How to Fix Cracked Soles on Winter Shoes? Protect Your Footwear for Winter

Cracks in the soles of winter boots can be a nuisance, especially when winter brings snow, mud, or water to the road. Protecting your footwear from moisture and cold is essential to getting through the season comfortably. There are several effective methods for repairing cracks in the soles that will help you extend the life of your winter boots.

1. Using glue to repair shoes

Shoe glue is one of the easiest ways to repair cracks. Choose a flexible glue that is waterproof and resistant to low temperatures, such as polyurethane glue.

1. Surface cleaning : Wash the sole and dry it thoroughly so that the glue adheres well. Remove dirt, stones and other debris from the crack.
2. Applying the glue : Gently spread the crack and apply glue inside. Make sure the glue fills the entire crack to create a strong seal.
3. Press and dry : After applying the glue, press the edges of the crack to make sure they stick together. Leave the shoe for 24 hours to allow the glue to dry and harden completely. Drying times may vary depending on the glue manufacturer – check the instructions on the package.

2. Filling the crack with shoe sealant

A sealant designed specifically for footwear is more flexible than glue and adapts better to the movement of the foot, making it ideal for larger cracks.

1. Preparing the shoe : Make sure the sole is clean and dry. If necessary, degrease the surface with isopropyl alcohol.
2. Applying the sealant : Press the sealant into the crack, filling it completely. Use a small spatula or stick to even out the surface of the sealant flush with the sole.
3. Smoothing and drying : Gently smooth the surface to eliminate any bulges. Leave the shoe for 24 hours to dry completely.

3. Repairing Cracks with Liquid Rubber

Liquid rubber is a flexible and waterproof material that works great on cracks, providing them with additional protection against moisture and frost. It is available in tubes and is easy to apply.

1. Sole preparation : Clean and dry the surface of the sole. If possible, lightly sand the edges of the crack with sandpaper to roughen the surface, which will help the liquid rubber to adhere better.
2. Applying liquid rubber : Press liquid rubber into the crack until it fills it completely. Apply a layer to the outside as well, creating a protective coating.
3. Drying time : Allow the shoe to dry for a minimum of 24 hours for the rubber to harden and become damage-resistant.

4. Rubber patches for larger cracks

If the crack is large and glue or liquid rubber may not be enough, it is worth using special rubber patches designed for shoe repairs.

1. Preparing the crack : Clean and dry the sole. Make sure the crack is dry and free from debris.
2. Applying the glue : Apply waterproof shoe glue to the inside of the patch and around the crack on the sole.
3. Applying the patch : Press the patch onto the crack, making sure it adheres evenly. You can use tape to hold the patch in place while the glue dries.
4. Drying : Leave the shoe to dry for at least 24 hours. Make sure the glue has bonded the patch well to the sole.

5. Cover the crack with silicone sealant

Silicone sealant is another effective solution, especially for smaller cracks.

1. Clean the crack : Make sure the crack is dry and clean. Remove any debris.
2. Applying the sealant : Fill the crack with silicone sealant, using a small putty knife to spread the material evenly.
3. Smoothing the surface : Smooth the surface of the sealant to even it out with the rest of the sole.
4. Drying time : Leave the shoe to dry for about 24 hours. The silicone will bond well with the sole, creating a tight barrier against moisture.

6. Waterproof your shoes regularly

After repair, it is a good idea to regularly impregnate the shoes to protect them from moisture and road salt, which can contribute to the formation of further cracks.

1. Choosing a waterproofing agent : Choose a waterproofing agent suitable for the material your shoes are made of – it can be in a spray or cream form.
2. Applying the impregnation : Spray or rub the impregnation onto the entire surface of the shoe, paying special attention to the sole and areas that were repaired.
3. Repeat waterproofing : Repeat the waterproofing process every few weeks to keep your shoes in the best condition possible.

Additional tips

• Avoid prolonged contact with water : Even after repairs, try to avoid soaking your shoes for extended periods of time as moisture can weaken the repaired areas.
• Quick response to new cracks : If you notice a new crack, repair it as soon as possible to avoid further damage and water from getting inside the shoe.
• Dry your shoes after each use : After returning from a damp area, dry your shoes at room temperature, avoiding drying them on a radiator, which can cause the material to crack.

With these methods, you can effectively repair cracks on the soles and protect your winter footwear so that it will last the entire winter in good condition.